TK212A 3BSC630197R1

使用方法：Protection thresholds such as high/low voltage and high/low frequency can be set. Support delayed action function to avoid misoperation caused by instantaneous fluctuations. Usually equipped with communication protocols such as Modbus and DNP3, making it easy to integrate with SCADA systems or PLCs.
发货时间：2-3 days
付款方式：SWIFT C/*C
原产地：USA
联系方式：+8615359029662
销售范围：all over the world
用途：Suitable for various industrial automation applications that require precise control of excitation current.

手机：+86 153 5902 9662 邮箱：geabbamy@gmail.com

产品详情

　　¡Debido a que el inventario es muy grande, no hay forma de que cada producto proporcione fotos reales, ¡ por favor, perdóname!

　　لأن كمية المخزون كبيرة جدا ، لا يمكن أن توفر كل منتج صورة حقيقية ، يرجى أن يغفر لي !

　　Поскольку запасы очень большие, нет способа предоставить реальные фотографии каждого продукта, пожалуйста, извините!

　　Due to the large inventory, it is not possible to provide authentic photos for every product. We apologize for any inconvenience caused!

Product basic description (parameters)：

The TK212A 3BSC630197R1 module, manufactured by ABB, is a specialized industrial automation component designed for high-performance control and communication tasks. Below is a detailed technical description in English:

1. General Information

Manufacturer: ABB
Model: TK212A
Order Code: 3BSC630197R1
Type: Industrial Automation Module (specifically a tool cable or communication module)
Application: Primarily used in industrial automation systems for connecting PCs to controllers (e.g., CI801, CI840, or CI840A) for software downloads and data communication.

2. Technical Specifications

Interface:
- RJ45 (male) to Dsub-9 (female) connector.
- Supports PROFIBUS DP总线 (PROFIBUS DP bus) communication.
Cable Length: 3 meters (standard), with options for custom lengths (e.g., 20 meters as mentioned in some sources).
Electrical Specifications:
- Voltage Rating: Typically 24V DC (specific voltage may vary based on application).
- Current Rating: Not explicitly stated but designed to handle industrial communication loads.
Signal Conversion:
- Converts electrical signals from the PROFIBUS DP bus to optical signals, enhancing signal stability and anti-interference capabilities.
Redundancy Design:
- Features dual electrical and dual optical interfaces, supporting dual-network redundancy and optical ring networks.
Configuration Flexibility:
- Supports point-to-point, star, chain, ring, and hybrid network structures.
Long-Distance Transmission:
- Optical fiber transmission distance can exceed 20 km, overcoming the limitations of traditional cable systems.
Adjustable Rate:
- Based on standard PROFIBUS DP, the transmission rate can be set via a dip switch or selected for adaptive rate settings, supporting 10 common rates of the PROFIBUS DP bus.

3. Physical Characteristics

Dimensions:
- Length: 132 mm
- Width: 105 mm
- Height: 52 mm
Weight: 800 g (net weight)
Installation Method: 35mm DIN rail mounting.
Enclosure: IP30 protection rating, with a wave-patterned aluminum reinforced casing.

4. Environmental Specifications

Operating Temperature: -10°C to 70°C (optional wide-temperature range: -40°C to +85°C).
Relative Humidity: ≤90% (non-condensing).
Storage Temperature: -40°C to 80°C.

5. Certifications and Compliance

The module complies with various industrial standards for electromagnetic compatibility (EMC), including:
- IEC61000-4-2 (ESD): ±8 kV (air), ±4 kV (contact).
- IEC61000-4-3 (RS): 10 V/m (80-1000 MHz).
- IEC61000-4-4 (EFT): L-N-PE: ±2 kV, Data Line: ±1.0 kV.
- IEC61000-4-5 (Surge): L-N: ±1 kV, L/N-PE: ±2 kV, Data Line: ±0.5 kV.
- IEC61000-4-6 (CS): 10 V (150 kHz-80 MHz).
- IEC61000-4-8 (MS): Long-term: 30 A/m, Short-term: 300 A/m.
- IEC61000-4-11 (Dips): Compliant with voltage dip and interruption immunity standards.

6. Key Features

High Reliability: The dual-redundancy design ensures continuous operation even in the event of a single-point failure.
Flexible Configuration: Supports various network topologies, making it suitable for complex industrial environments.
Long-Distance Communication: Enables reliable communication over long distances, reducing the need for repeaters in extensive systems.
Easy Integration: The RJ45 and Dsub-9 connectors facilitate easy connection to PCs and industrial controllers.
Robust Design: The aluminum casing and IP30 rating provide protection against dust and moisture, suitable for harsh industrial environments.

7. Applications

Industrial Automation: Widely used in industries such as wind power, hydropower, nuclear power, and manufacturing for remote monitoring and control of motors, frequency converters, and other equipment.
Data Acquisition Systems: Ideal for applications requiring high-speed, stable data transmission over long distances.
Redundant Systems: Suitable for critical applications where system uptime is essential, such as in process control and safety systems.

8. Warranty and Support

Warranty Period: Typically 1 year, with options for extended warranties available through ABB or authorized distributors.
Technical Support: ABB provides comprehensive technical support, including documentation, software tools, and customer service.

The TK212A 3BSC630197R1 module is a high-performance, reliable, and versatile industrial automation component designed to meet the demanding requirements of modern industrial control systems. Its advanced features, including redundancy, long-distance communication, and flexible configuration, make it an ideal choice for critical industrial applications.

=========================================================

ABB聽聽聽PM864AK01聽3BSE01816R1鈥_1_副本.jpg

ABB聽聽聽PM864AK01聽3BSE01816R1鈥_3_副本.jpg

ABB聽聽聽PM864AK01聽3BSE01816R1鈥_5_副本.jpg

未标题-1_副本.jpg